**************************************** Unico V2.5.0 2026.3.17 **********************************************************************
 [Software Version] Unico		                                                                     V2.5.0
 [Supporting All-in-One Controllers] VC6 Pro, VC10 Pro, VC16 Pro                         	     V1.2.0
 [Supporting All-in-One Controllers] VX2000 Pro, VX1000 Pro, VX600 Pro, VX400 Pro     V1.3.0
 
 [New Features]       
	1. Support the sub-screen function.
	2. Support the correction function module, allowing for dark or bright lines correction.
	3. Add new product model options for simulation devices.
	4. Support the user mode selection and user login.
	5. Support the display of the imported EDID file name.
	6. Support the auto enabling of the low latency function.

 [Improvements]
	1. Enhanced LED screen configuration interactions.
	2. Removed the generic suffix from the standard EDID list.
	3. Moved the toolbar to the top of the Programming interface.
	4. During quick topology, press ESC to cancel and press Enter to confirm the wiring.
	5. Added a QR code and link on the webpage for obtaining the product documentation.
 
 [Changes]
               None

 [Bug Fixes]
               1. Fixed the issue of device access failure when there is an IP conflict between the simulation and physical devices.
               2. Fixed the issue where there is a low probability of prompting the error message "Unable to open Unico" when reopening the software after installing Unico on macOS.

 [Notes]
	1. To resolve connector status mismatch between Unico and the physical device after restarting or updating the device, return to the project interface and re-access to the device configuration interface.
                2. Project files from versions earlier than Unico V2.2.0 cannot be imported into Unico V2.2.0 and later versions.
	3. The test tool only supports Windows operating systems.
	4. If you have installed Unico V2.4.0 or later and wish to revert to a version earlier than Unico V2.3.0, you must first uninstall Unico, and subsequently install your desired version.

**************************************** Unico V2.3.0 2025.9.29 **********************************************************************
 [Software Version] Unico		                                                                     V2.3.0
 [Supporting All-in-One Controllers] VC6 Pro, VC10 Pro                           	                     V1.1.2
 [Supporting All-in-One Controllers] VX2000 Pro, VX1000 Pro, VX600 Pro, VX400 Pro     V1.2.0

 [New Features]       
	1. Support the view of the software user manual in Unico, allowing users to view related operations.
	2. Hover the mouse over the Ethernet port, input connector and OPT port on the device rear panel on the Device interface to view related information.
	3. Support the screen connection file (.ncp/.rcfgx) sending.
	4. Support the data interworking between NovaLCT and Unico for screen connection for VX Pro series of V1.2.0.
	5. For VX Pro series of V1.2.0, the USB source supports the input backup settings.

 [Improvements]
	1. Toolbar optimization: Reclassified the toolbar menu and relocated the language switch to the top right corner for easier access.
	2. Refined the Mac client UI style to align with the Mac system for closing the pop-up window.
	3. Added the saving prompt after changing the cabinet parameters on the Screen Settings interface.
	4. Automatically select the screen loaded by the selected device on the Device and Screen interface.
	5. Added the prompt message of the IP conflict.
	6. Optimized the names of the transition effects of the USB media file.

 [Changes]
               None

 [Bug Fixes]
               None

 [Notes]
	1. If the connector status displayed in the software does not match that of the actual device after a device restart or update, switching to the home page and re-entering the device page can solve the problem.
	2. If your computer has antivirus software installed, some subprograms may be flagged as risky files during the software installation process. Simply click Run to proceed.
	3. The test tool only supports Windows operating systems.